MSDS Sheets

Product Identifier: SRC Basecoat

Product Use: Protective Coating

Manufacturer's Name: Synergy Advanced Technology

Supplier's Name:  Synergy Advanced Technology

Street Address: #33 - 8528 123rd St.

Street Address: #33 - 8528 123rd St.

City:  Surrey

Province: BC

City:  Surrey

Province: BC

Postal Code: V3W 3V6

Emergency Phone: (604) 596-1000

Postal Code:V3W 3V6

Emergency Phone:(604) 596-1000

Hazardous Ingredients(Specific)

%

CAS Number

LD 50 of Ingredient (Specify species, route)

LC 50 of Ingredient 
(Specify species)

XYLENE (MIXED ISOMERS)

55

1330-20-7

4300 mg/kg(Oral, RAT)

5000 ppm(Vapor, RAT)

Physical State:
Liquid

Odour and Appearance:
Liquid (colours vary) with a strong solvent smell

Odour Threshold(ppm):
Not Available

Specific Gravity:
1.08

Vapor Density(air=1):
Not Available

Vapor Pressure(mmHg):
Not Available

Evaporation Rate:
Not Available

Boiling Point (º C ) :
Not Available

Freezing Point(º C ):
Not Available

pH:
Not Applicable

Coefficient of Water/Oil Distribution: Not Available

Flammability: Yes

If yes, Under which Conditions?  flammable liquid

Means of Extinction: Alcohol foam, Carbon dioxide, Dry chemical powder, Polymer foam, water.

Flashpoint and Method:
7 °C Closed Cup

Upper Flammable Lt (% by Volume): Not Available

Lower Flammable Lt (% by Volume):  Not Available

Autoignition Temperature:
Not Available

Explosion Data - Sensitivity to Impact: No

Explosion Data - Sensitivity to Static discharges: No

Hazardous Combustion Pdts: sulfur dioxide, nitrogen oxides, carbon monoxide, calcium oxide, carbon dioxide, sulfur oxides, carbon monxide, magnesium oxide, hydrogen chloride, phosgene, chlorine, chlorine dioxide.

Chemical Stability: Stable

If Yes, Under which Conditions? Not Applicable

Incompatibility with other substances: Yes

If yes, which ones? Strong Acids, Strong Oxidizing agents,  Strong Bases

Reactivity, and under what conditions? heat, sparks, open flame, generation of dust, ignition sources

Hazardous Decomposition Products: sulfur dioxide, carbon monoxide, nitrogen oxides, carbon dioxide, phosgene, hydorgen chloride, hydrogen chloride, chlorine

Route of Entry

Skin Contact: Yes

Absorption: Yes

Eye Contact: Yes

Inhalation: Yes

Ingestion: Yes

Effects to Acute exposure to Product:
XYLENE (MIXED ISOMERS) has been known to cause HEADACHE, FATIGUE, IRRITABILITY, LASSITUDE, NAUSEA, ANOREXIA, FLATULENCE, IRRITATION OF THE EYES, NOSE, AND THROAT, MOTOR INCOORDINATION and IMPAIRMENT OF EQUILIBRIUM.

Effects to Chronic exposure to Product:
XYLENE (MIXED ISOMERS) has been known to cause CONJUNCTIVITIS, DRYNESS OF THE NOSE, THROAT, AND SKIN, DERMATITIS, KIDNEY AND LIVER DAMAGE.

Exposure Limits (Value,Units,By)
XYLENE (MIXED ISOMERS): 100 PPM ACGIH

 Irritancy (if yes, explain)
XYLENE (MIXED ISOMERS) is a skin and eye irritant. 

Sensitization (if yes, explain)

Carcinogenicity (if yes, explain)

Reproductive Toxicity (if yes, explain)

Teratogenicity (if yes, explain) XYLENE (MIXED ISOMERS) may cause birth defects. (Xylene has teratogenic effects on some animals)

Mutagenicity (if yes, explain)

Synergistic Products (if yes, explain)

Personal Protective Equipment

Gloves: Yes

Respirator: Yes

Eye: Yes

Footwear: No

Clothing: No

Other: No

If checked, specify type: Gloves: BUTYL RUBBER Respirator: NIOSH APPROVED Eye: SPLASH RESISTANT

Engineering controls (specify such as ventilation, enclosed process): Use mechanical ventilation to reduce exposure, ground all equipment and avoid exposure to open flames or sparks

Leak and Spill Procedure: Wear adequate protective equipment and eliminate all ignition sources. Contain spill with absorbent material and place in a suitable covered and labeled container for disposal

Waste Disposal: Check with Federal, Provincial and local government regulations and requirements prior to disposal

Handling Procedures Equipment: Use in a well ventilated area. Do not use with incompatible substances and keep away from heat and all ignition sources. Use grounded and and non-sparking equipment only.

Storage Requirements: Store in a cool, well ventilated area out of direct sunlight. Store away from heat and all ignition sources. Storage facility should be manufactured out of fire resistant materials.

Special Shipping Information: TDG Shipping Name: PAINT Classification: 3.2 Packing Group: II Identification Number: UN1263

Inhalation: Remove to fresh air. Get medical help if there is any breathing difficulty

Ingestion: Do not induce vomiting unless directed by a physician. If conscious and alert, give two glasses of water. Seek medical attention immediately

Skin Contact: Remove Contaminated clothing (including shoes) and wash before reuse. Flush with large amounts of soap and water. If irritation persists, seek medical attention.

Eye Contact: Flush eyes with large amounts of lukewarm water for 20 minutes, while holding eyelids open or until irritation subsides. If irritation persist, get medical attention.

Prepared by:
Synergy Advanced Technology

Phone:
(604) 596-1000

Preparation Date:
Feb 10, 2003

Product Identifier: SRC Topcoat

Product Use: Protective Coating

Manufacturer's Name: Synergy Research Corp

Supplier's Name: Synergy Advanced Technology

Street Address: #33-8528 123^rd Street

Street Address: #33-8528 123^rd Street

City: Surrey

Province: BC

City: Surrey

Province: BC

Postal Code: V3W 3V6

Emergency Phone:
(604) 596-1000

Postal Code: V3W 3V6

Emergency Phone:
(604) 596-1000

Hazardous Ingredients(Specific)

%

CAS Number

LD 50 of Ingredient
(Specify species, route)

LC 50 of Ingredient (Specify species)

ZINC OXIDE

3.12

1314-13-2

7950 mg/kg (Oral, MOUTH)

Not Available

SILICA, CRYSTALLINE, QUARTZ

13

14808-60-7

Not Available

Not Available

Physical State:
Liquid

Odour and Appearance:
liquid with a slight ammonia smell

Odour Threshold(ppm):
Not Available

Specific Gravity:
1.27

Vapor Density(air=1):
Not Available

Vapor Pressure(mmHg):
Not Available

Evaporation Rate:
Not Available

Boiling Point(º C ):
Greater than 100°C

Freezing Point(º C ):
Less than 0°C

pH:
8.5-9.5

Coefficient of Water/Oil Distribution:
Not Available

Flammability: No

If yes, Under which Conditions? Not Applicable

Means of Extinction: Alcohol foam, Carbon dioxide, Dry chemical powder, Polymer foam

Flashpoint and Method:
Not Applicable

Upper Flammable Lt (% by Volume):Not Applicable

Lower Flammable Lt (% by Volume):Not Applicable

Autoignition Temperature:
Not Applicable

Explosion Data - Sensitivity to Impact:
No

Explosion Data - Sensitivity to Static discharges: No

Hazardous Combustion Pdts: carbon monoxide, carbon dioxide, calcium oxide, ammonia, nitrogen oxides, magnesium oxide

Chemical Stability: Stable

If Yes, Under which Conditions? Not Applicable

Incompatibility with other substances: Yes

If yes, which ones? Strong Acids Strong Oxidizing agents
Strong Bases

Reactivity, and under what conditions?

 Hazardous Decomposition Products: carbon monoxide, carbon dioxide, aldehydes

Route of Entry

Skin Contact: Yes

Absorption: Yes

Eye Contact: Yes

Inhalation: Yes

Ingestion: Yes

Effects to Acute exposure to Product:
ZINC OXIDE has been known to cause METAL FUME FEVER (FLU LIKE SYMPTOMS; SWEATING,
SHIVERING HEADACHE, FEVER, NAUSEA, VOMITING and AND TIREDNESS).

Effects to Chronic exposure to Product:
SILICA, CRYSTALLINE, QUARTZ has been known to cause PROLONGED OR REPEATED EXPOSURE OF CRYSTALLINE SILICA DUST MAY CAUSE SILICOSIS.

Exposure Limits (Value,Units,By)
ZINC OXIDE: 10 mg/m3 ACGIH
SILICA, CRYSTALLINE, QUARTZ: 0.1 mg/m3 ACGIH

 Irritancy (if yes, explain)
ZINC OXIDE is a skin and eye irritant. SILICA, CRYSTALLINE, QUARTZ is a skin and eye irritant.

Sensitization (if yes, explain)

Carcinogenicity (if yes, explain) SILICA, CRYSTALLINE, QUARTZ is considered to be a suspected human carcinogen(A2) by ACGHI. SILICA, CRYSTALLINE, QUARTZ is carcinogenic to humans(1) by IARC.

Reproductive Toxicity (if yes, explain)

Teratogenicity (if yes, explain)

Mutagenicity (if yes, explain)

Synergistic Products (if yes, explain)

Personal Protective Equipment

Gloves: No

Respirator: Yes

Eye: No

Footwear: No

Clothing: No

Other: No

If checked, specify type: Respirator: DUST MASK, WHEN SANDING

Engineering controls (specify such as ventilation, enclosed process):
Use mechanical ventilation to reduce exposure, ground all equipment and avoid exposure to open flames or sparks

Leak and Spill Procedure: Wear adequate protective equipment and eliminate all ignition sources. Contain spill with absorbent material and place in a suitable covered and labeled container for disposal

Waste Disposal: Check with Federal, Provincial and local government regulations and requirements for disposal

Handling Procedures Equipment: Use in a well ventilated area. Do not use with incompatible substances and keep away from heat and all ignition sources. Use grounded and non-sparking equipment only.

Storage Requirements:
Store in a cool, well ventilated area out of direct sunlight. Store away from heat and all ignition sources. Storage facility should be manufactured out of fire resistant materials.

Special Shipping Information: None Required

Inhalation: Remove to fresh air. Get medical help if there is any breathing difficulty

Ingestion: Do not induce vomiting unless directed by a physician. If conscious and alert, give two glasses of water. Seek medical attention immediately

Skin Contact: Remove Contaminated clothing (including shoes) and wash before reuse. Flush with large amounts of soap and water. If irritation persists, seek medical attention.

Eye Contact: Flush eyes with large amounts of lukewarm water for 20 minutes, while holding eyelids open or until irritation subsides. If irritation persist, get medical attention.

Prepared by: Synergy Advanced Technology

Phone: (604) 596-1000

Preparation Date: Mar 07, 2003